Only just got it and playing with TURBOCNC ant the moment and finding it basic fancy the VR software, What do you think?
Thanks.
CNC Expert
not sure what you mean by software there as turbocnc is for controlling the machine (ok so it's sw) & VR sw is for making bits.do you want something for driving the orac or a CAD CAM package? (drawing & making bits)
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
Site Admin
Our current lathe CAD / CAM software is pretty basic as well (LatheCAM).
The VR Turning software shows the tool path / finished part quite nicely, but wouldn't be able to control the ORAC, and may not show the same results as the machine, from the same CNC program.
You could experiment with a VR Turning demo version - if I remember correctly, you can enter and simulate around 30 lines of CNC code...
https://www.denfordata.com/downloads/VRTurning-Demo.zip
(7Mb zip file)
The VR Turning software shows the tool path / finished part quite nicely, but wouldn't be able to control the ORAC, and may not show the same results as the machine, from the same CNC program.
You could experiment with a VR Turning demo version - if I remember correctly, you can enter and simulate around 30 lines of CNC code...
https://www.denfordata.com/downloads/VRTurning-Demo.zip
(7Mb zip file)