Denford Mirac Lathe '2000

[Karlis]

Need Automatic Indexing 8 Station toolpost for my Denford Mirac Lathe (year 2000, serial nr.00081). I could use some help where to look.. Thanks.

[Denford Admin]

From our records, the machine had a Denford-made DM8 toolpost with Omron drive:
OMRON
3G3JV 0.55KW
N9P1931-001-12

What has happened to the old one ? Does it need replacing or repairing ?

[Karlis]

Some parts of it has worn, for example pic - parts inner diameter is now 1,5mm larger; rotary switch (ordered one already) and hooks or jaws (i don't know how to call them ). I think it rather needs to be replaced.

1.jpg (38.54 KiB) Viewed 10376 times

[bradders]

Unfortunately we do not have this part

[Karlis]

This specific part or entire toolpost?

[bradders]

Our designer is off work at the moment, so we will have to wait for his return to see what or if we can offer

[Karlis]

Hi! Did he come back?

[bradders]

He's not back yet.

[Steve]

Hi,

We do not have any parts for the DM 8 turret.

Attached is a link to the turret drawing.

https://www.denfordata.com/projectimages ... rawing.pdf

Can you identify the part you require and we can then have a look to see if there is anything we can do to help?

This post may be helpfull also

viewtopic.php?f=40&t=157

[Karlis]

Hi,

So, the parts:

TP126/3 - Worm gear
TP126/5 - Reversing Bush
TP126/8 - Locking Pawl

Last week I received and installed new Rotary Switch (Grayhill), now the machine functions a bit better. But I wish to replace all worn parts if possible.

kind regards,
Karlis

[Karlis]

One more:

TP126/9 - Locating Pawl

[Steve]

Hi,

Sorry to say we dont stock any of the items but the Worm gear was made by Hewwitt & Topham

Royd Way, Keighley, West Yorkshire BD21 3LG United Kingdom Telephone: +44 (0) 1535 602587

I have attached drawings for all the parts. I am sure you can make your own on some of them but can subcontract the others.