Balluff Proximity switch sale

Post by **Denford Admin** » Tue 13 Jul , 2010 13:53 pm

We have some stock of Balluff proximity switches BI00401A
I believe they have been used for home detectors on older Denford machines (Triacs, Easimills, Easiturns, NovaMills and possibly Orac)
They are brand new, but UNTESTED (so, no complaints if they don't work, although there's no reason why they shouldn't)

: balluff-prox.jpg (131.24 KiB) Viewed 23410 times

£25 each + £10.00 next day Courier delivery + VAT

sweep · Post by **sweep** » Tue 13 Jul , 2010 17:36 pm

"max two per member" ...that's a bit rotten for owners of 3 axis machines

Triac whizz · Post by **Triac whizz** » Tue 13 Jul , 2010 18:30 pm

We've recently found some old stock of....

next you'll be telling us you've found a old stock of those bubblegum machines!

There seems to be an issue with your stock control system

Post by **Denford Admin** » Wed 14 Jul , 2010 9:23 am

"max two per member" ...that's a bit rotten for owners of 3 axis machines

I might make an exception - I couldn't work out a price for 3

Make us an offer for them all !

There seems to be an issue with your stock control system

There obviously has been in the past - it's well under control now

NB - old stock will be disposed of sometime before the end of the year, due to the move to new premises, so don't hang around !

sweep · Post by **sweep** » Mon 18 Oct , 2010 20:12 pm

You mention "old stock."
What might you have lying around for a Triac ATC (BT35) ?
Will call round and collect if you any Triac stuff that is heading towards the skip!

Stig of the (Birkenshaw) dump

Post by **Denford Admin** » Tue 19 Oct , 2010 10:01 am

I think anything not going with us is in the skip now, I'll have a double check for you.

Steve · Post by **Steve** » Tue 19 Oct , 2010 10:39 am

We do have a fair bit of BT30 tooling, toolholders collets etc etc.

We intend to try and sell on via either a trader or have an open day.

sweep · Post by **sweep** » Tue 19 Oct , 2010 15:56 pm

keep me posted on the open-day Steve as I like a good rummage!

...Sweep

el$syd · Post by **el$syd** » Tue 26 Oct , 2010 9:39 am

I don't know whether my 1995 TRIAC PC has them...
Do these baluffs break down ?
If my TRIAC's baluff's break, are there alternatives?

What on earth are these proximity switches and how do they work?

PS: The baluff web site cannot find these parts.

Post by **Denford Admin** » Tue 26 Oct , 2010 10:31 am

PS: The baluff web site cannot find these parts.

I'll put the price up then!

There's some good info on inductive proximity sensors here:
https://www.altechcorp.com/HTML/Sensors_Standard-A.html

sweep · Post by **sweep** » Tue 26 Oct , 2010 11:17 am

I think this is the spec sheet for them, not that I could make any sense from it!

...Sweep

angel-tech · Post by **angel-tech** » Sun 31 Oct , 2010 20:19 pm

Steve wrote:We do have a fair bit of BT30 tooling, toolholders collets etc etc.

We intend to try and sell on via either a trader or have an open day.

Quite interested in these as well.

Post by **Denford Admin** » Mon 01 Nov , 2010 9:53 am

sweep has had a look around and could tell you more about what might be of use then I can.
Not sure about open day or ebay yet

Steve · Post by **Steve** » Mon 01 Nov , 2010 14:04 pm

Will try and add some photos of some of the stuff.

If there is anything of interest make an offer.

Ben L · Post by **Ben L** » Mon 14 Aug , 2017 16:14 pm

Denford Admin wrote:We have some stock of Balluff proximity switches BI00401A
I believe they have been used for home detectors on older Denford machines (Triacs, Easimills, Easiturns, NovaMills and possibly Orac)
They are brand new, but UNTESTED (so, no complaints if they don't work, although there's no reason why they shouldn't)

£25 each + £10.00 next day Courier delivery + VAT

Ive tried Pm 'ing you but all messages to admin just seem to stay in my outbox. most likely ive sent multiple pm abou the same thing. I would like to buy one of these please

Information