Balluff Proximity switch sale

[Denford Admin]

We have some stock of Balluff proximity switches BI00401A
I believe they have been used for home detectors on older Denford machines (Triacs, Easimills, Easiturns, NovaMills and possibly Orac)
They are brand new, but UNTESTED (so, no complaints if they don't work, although there's no reason why they shouldn't)

balluff-prox.jpg (131.24 KiB) Viewed 23764 times

£25 each + £10.00 next day Courier delivery + VAT

[sweep]

"max two per member" ...that's a bit rotten for owners of 3 axis machines

[Triac whizz]

We've recently found some old stock of....

next you'll be telling us you've found a old stock of those bubblegum machines!

There seems to be an issue with your stock control system

[Denford Admin]

"max two per member" ...that's a bit rotten for owners of 3 axis machines

I might make an exception - I couldn't work out a price for 3
Make us an offer for them all !

There seems to be an issue with your stock control system

There obviously has been in the past - it's well under control now

NB - old stock will be disposed of sometime before the end of the year, due to the move to new premises, so don't hang around !

[sweep]

You mention "old stock."
What might you have lying around for a Triac ATC (BT35) ?
Will call round and collect if you any Triac stuff that is heading towards the skip!

Stig of the (Birkenshaw) dump

[Denford Admin]

I think anything not going with us is in the skip now, I'll have a double check for you.

[Steve]

We do have a fair bit of BT30 tooling, toolholders collets etc etc.

We intend to try and sell on via either a trader or have an open day.

[sweep]

keep me posted on the open-day Steve as I like a good rummage!

...Sweep

[el$syd]

I don't know whether my 1995 TRIAC PC has them...
Do these baluffs break down ?
If my TRIAC's baluff's break, are there alternatives?

What on earth are these proximity switches and how do they work?

PS: The baluff web site cannot find these parts.

[Denford Admin]

PS: The baluff web site cannot find these parts.

I'll put the price up then!

There's some good info on inductive proximity sensors here:
https://www.altechcorp.com/HTML/Sensors_Standard-A.html

[sweep]

I think this is the spec sheet for them, not that I could make any sense from it!

...Sweep

[angel-tech]

We do have a fair bit of BT30 tooling, toolholders collets etc etc.

We intend to try and sell on via either a trader or have an open day.

Quite interested in these as well.

[Denford Admin]

sweep has had a look around and could tell you more about what might be of use then I can.
Not sure about open day or ebay yet

[Steve]

Will try and add some photos of some of the stuff.

If there is anything of interest make an offer.

[Ben L]

We have some stock of Balluff proximity switches BI00401A
I believe they have been used for home detectors on older Denford machines (Triacs, Easimills, Easiturns, NovaMills and possibly Orac)
They are brand new, but UNTESTED (so, no complaints if they don't work, although there's no reason why they shouldn't)


£25 each + £10.00 next day Courier delivery + VAT

Ive tried Pm 'ing you but all messages to admin just seem to stay in my outbox. most likely ive sent multiple pm abou the same thing. I would like to buy one of these please