Triac Fanuc OM ATC

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Dougal
Posts: 5
Joined: Wed 04 Jan , 2023 9:10 am
Hardware/Software: Starmill.
Linuxcnc.

Triac Fanuc OM ATC

Post by Dougal » Sun 19 Jan , 2025 10:10 am

I am considering buying one of these two machines and wonder if the electrical specification sheets are still available? I have attached photos of the data plates.

I am wondering why the full load current is much higher on one than the other.

Also, are the electrical wiring diagrams available?

Thanks, Dougal.
IMG-20250117-WA0000.jpg
IMG-20250117-WA0000.jpg (234.75 KiB) Viewed 2983 times
IMG-20250117-WA0001.jpg
IMG-20250117-WA0001.jpg (284.34 KiB) Viewed 2983 times
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac Fanuc OM ATC

Post by Martin » Mon 20 Jan , 2025 12:39 pm

Not sure why the currents differ so much.
Attachments
29080A-002.pdf
(14.63 KiB) Downloaded 51 times
29080A-001.pdf
(30.57 KiB) Downloaded 68 times
TR29077D.pdf
(42.32 KiB) Downloaded 48 times
Top
Dougal
Posts: 5
Joined: Wed 04 Jan , 2023 9:10 am
Hardware/Software: Starmill.
Linuxcnc.

Re: Triac Fanuc OM ATC

Post by Dougal » Mon 20 Jan , 2025 16:24 pm

Great!
Thank you.
Top
Post Reply

Return to “Electronics”