Search found 21 matches

Hi, can anyone please let me know if a .37kw spindle was ever fitted to a triac. It seems very low powered. And what options are there available in the U.K. for a larger slow revolution spindle for milling steel. Thanks

Hi, please post more details including price and location, and a picture if possible. Thanks

Hi Bob, like all things it depends on distance and price. Please let me know both. Thanks

Hi, looking to buy a running orac cnc lathe. Mach3 control or similar, not Denford software please. No silly prices. If you have one for sale please let me no.

Hi, is the lathe still for sale? If so can you please let me a few details. Running condition, operating system, price, location. Thanks

Hi, what size collects does the trick use. Thanks

Hi out there. I am trying to put together the z axis for the micromill. I am having a problem with fitting the jib. Which ever way I try to fit it the result is always the same. No movement. Can anyone please let me know the correct way to fit this part. Thanks

Hi, I wish to run the original orac lathe motor from a vfd. My understanding is that the motor can be run from a vfd. I have looked inside the motor wiring housing but there is no information to be seen on the wiring configuration settings. Can someone please let me know if I need to just wire the ...

Hi, I need to replace the original axis motors with new ones. The size of the original motor cases look like the replacement size would be nema34. However the problem is that the original motor shaft size is 9.5mm O/D and the only nema 34 motors I can find here in the uk are 8 wire motors. However I ...

Hi, I am trying to convert a Denford 2600 router to machine 3. I am now at the motor tuning position. All the motors are original bar the z axis motor. My problem is that the X and Y motors are not sounding too happy once set to move the correct distance. My feeling is that the micro step setting on ...

Hi, for sale is my Denford micromill, it as a replacement standalone spindle with speed control, makes it a bit more useful. Comes with pc with pathpilot software. The machine was working ok, until I moved it to make space. It now does not work. All the led,s on the boards light up and pathpilot ...

Hi, can anyone please let me know if their is a single phase speed controller spindle that will just drop into place of the original single speed unit. My machine as the original spindle with a funny sort of collet with a circlip. I only have one of these collets and with know speed control it ...

Thanks, I just hope my Denford board is the same. But it looks like it can be done, just need to find the correct connections.

Hi, I have a Denford micromill. All the old Denford boards are still in the machine. The spindle as been swapped out for a stand alone unit. I would like to run the mill using Mach3. Can anyone please let me know if it’s possible to somehow connect a Mach3 breakout board to the original Denford ...

Hi out there. I have been looking for information on the Porter cable 86902 spindle. Not been able to find anything useful at all. My problem is that I don’t know if the motor works or not. There are four wires coming from the motor. A blue, brown and two earth wires. The motor is 240v. I don’t know ...

Hi, can anyone please help me out. I need to know which wires are for the Mills axis motors. Can anyone please I’d the board and give me a link to a drawing or I’d the correct wires thanks. The mill runs off pathpilot, and that is the board on the far left of the picture.

Hi, can anyone please let me know what I need to run the spindle on a 2600 router. I am running the stepper motors using Mach3. There are no Denford electric boards in the machine. Thanks

Hi, I have a Denford micro router which runs off tormach pathpilot. I wish to remove the pathpilot part from the machine and use it to run a router. However I am not sure about the way to go about it. Pathpilot is a bit dated, but I have it, so may as well try to use it. As far as I understand it ...

Hi Pete. Thanks for reply, I am not sure re price, I have seen the plain silly prices from dealers, but I am not sure they ever sale anything, as I don’t know anyone who as purchased one. I do no the cost of converting a Denford machine to Mach3, as I converted a Denford 2600 router. I am in Yeovil ...

Hi, I am looking for a Denford orac lathe. I am in the uk. Please no silly prices. Thanks, michael