Hi all,

I am after a auto tool changer, so please contact me if you have one for sale or no where to get one. They seem to be like rocking horse ....!

Cheers Steve

Hi. Thanks for letting me know and sorry for the late reply. Does the chuck come with the correct gear to hook it up to an easiturn and what dia is the chuck.

Cheers Steve

If anyone has an easiturn power chuck for sale please let me know. Cheers steve

thanks for your replys. i ve tried moving the photo interupter and the rpm reading does vary up and down when moved but its still not representing the correct rpm wherever i seem to move it. i will try the outputs with a volt meter and see what i can find out. It seems to only be counting some of th...

Hi all, wondered if anyone can help. I have an easiturn fitted with the original spindle speed controller. It stopped working the other week so i bought a new photo interupter ( rs 304-560) and had it soldered to the control board. it now works but seems to be out of calibration. i.e when its runnin...

Hi all,

wondered if anybody knows what the main spindle bearing part number is for an easiturn, and where the best place to get is.

Cheers steve

yes it is thankyou very much. i ve just ordered one from balluf. Thanks for your reply

Hi all

does anybody know the part number for the proximity sensors on an easiturn. i no its got an m8 thread an is 22.5 mm long but i dont seem to be getting anywhere with that info. its the one off the x axis. any help would be apreciated.

Cheers

Steve

wanted easiturn keyboard, if anyones got one spare please contact me

thanks for the reply. what retro fit would you suggest an how much is it likely to cost. i just seem to be getting one problem after another trying to run it as it is. The machine itself seems solid an very accurate for its age but the electonics keep letting it down and unfortunatly i am not to goo...

Hi all. i ve only just sorted the problem i had with my sd 20 drives and now have another problem. The keyboard does nt work. i ve disconnected it an plugged it in again to see if it was a dodgy connection but had no luck. Has anybody got any ideas.

Cheers

Steve

Thanks for the reply. Ive gone over both circuit boards with a fine tooth combe but cant see any visible damage i.e cracks or dry solder. I swapped the small board off the faulty drive with the board off the one that works and both drives work fine using that so now know thats the fault but dont no ...

I ve swapped X axis drive board with Z axis drive board and green light comes on so i am guessing its a fault with the drive. Ow dear! Anybody no of any common problems with these as i dont no where to start.

Cheers Steve

Thanks for all your help everyone. i ll try lowering the speed even more to see if the thread improves. cant try it now though as i ve got another problem with the z axis drive.

Cheers Steve

Hi can anyone help I have an easiturn 3 with z axis drive fault. I ve had the machine running but went to zero the machine the other day and it came up with this fault. I ve taken the cover off the control and the second red light is on on the z drive board, reading the manual this means there is a ...

I ve looked and looked again at the spindle disc but all the holes are elongated and are all on the same diametre. Any ideas?

Cheers Steve

Hi James

Thanks for the reply. I ve carried out the T test and both the 1 & 0 change as i turn the spindle but all the holes in the spindle disc are exactly the same. Does this seem correct.

Cheers Steve

Hi i have recently purchased a easiturn 3 and in am having trouble getting a decent thread, it does nt seem to be picking up the same cutting pass in Z when it goes to take another cut. nothing seems to be loose. Also, can anyone tell me how accurate the spindle speed should be. If i program it to 1...