My cousin-in-law asked me to come look at this Bridgeport he got recently from auction...£425 with lots of tooling !!
At first I just couldn't remember how to use the Heidenhain, but it all came back in the end - if I get time, I'll try making some notes on all the oddities that make the control difficult to use (even with the books!)
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Attachments:
- Bridgeport Interact-TNC355.jpg (78.43 KiB) Viewed 9563 times
CNC Expert
Just trying to make us jealous eh! 
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Well, I couldn't help think about the old denford machines going for more than that on eBay!
CNC Expert
but don't forget that Denford machines are much better quality that's why they have a higher resale value.
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
The support from this forum must be a major contributor to resale value then!