My Porter and Cable spindle motor bearing failed
Moderators: Martin, Steve, Mr Magoo
My Porter and Cable spindle motor bearing failed
The top bearing on my Porter And Cable Router spindle motor has collapsed - what can I do to fix it ?
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
You can either try and fix this yourself
- Denford Ltd only hold carbon brushes spares for these motors - try contact Porter and Cable in the UK via this website: https://www.porter-cable.co.uk (The spares page seems to be broken, but you can find their contact details)
The motor normally supplied with our MicroRouter machines is a Porter Cable model 86902.
Alternatively, Denford Ltd can supply a replacement motor - part no: BI00307N for £250 plus post and packing (usually from stock)
- Denford Ltd only hold carbon brushes spares for these motors - try contact Porter and Cable in the UK via this website: https://www.porter-cable.co.uk (The spares page seems to be broken, but you can find their contact details)
The motor normally supplied with our MicroRouter machines is a Porter Cable model 86902.
Alternatively, Denford Ltd can supply a replacement motor - part no: BI00307N for £250 plus post and packing (usually from stock)