These questions have probably been asked a million times here but search didn't seem to bring it up.
Is there such a thing as a service/workshop repair manual and parts books for a Triac PC Mill?
I'm thinking of stripping my unit down, I definitley need to replace the spindle bearings as there seems to be quite a lot of wear.... but would like to know what I'm letting myself in for in terms re-assembly, adjustments, special tools and available parts for it etc.
Thanks
Paul
Posts: 13
Joined: Wed 24 Jun , 2009 8:46 am
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Site Admin
re the spindle bearings:
viewtopic.php?f=4&t=1066
viewtopic.php?f=15&t=1953
and some other Triac Maintenance manuals:
viewtopic.php?f=4&t=523
viewtopic.php?f=15&t=1681
viewtopic.php?f=4&t=1066
viewtopic.php?f=15&t=1953
and some other Triac Maintenance manuals:
viewtopic.php?f=4&t=523
viewtopic.php?f=15&t=1681