Has any one any info on the denford Nova mill do i need the tutor keyboard or can i run it with a p.c. please.
Also for the Orac has any body got a compound slide and a spare tool holder please
Nova mill and orac lathe
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Nova mill and orac lathe
As far as I know you don't have to use the Tutor keyboard, but may need to change the .GO file (if its a DOS software vintage)Has any one any info on the denford Nova mill do i need the tutor keyboard or can i run it with a p.c. please.
Pre-baldor control software /photos / drawings:
viewtopic.php?t=196
DOS Milling machine operating manual:
viewtopic.php?t=1636
DOS Operating software downloads:
https://www.denford.ltd.uk/index.php?opt ... &Itemid=51
DOS Software -> Machine selections:
viewtopic.php?t=738
Novamill machine manual:
viewtopic.php?t=1518