Dwg ML100-512D - 5" Viceroy Metal Lathe Feed Nut (Metri

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Dwg ML100-512D - 5" Viceroy Metal Lathe Feed Nut (Metri

Post by Denford Admin » Mon 12 Jan , 2009 15:54 pm

Dwg ML100-512D - 5" Viceroy Metal Lathe Feed Nut (Metric)
Attachments
ML100-512D.pdf
(194.91 KiB) Downloaded 1060 times
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Post by Andy B » Mon 12 Jan , 2009 17:22 pm

Parts lists show this same nut used for 280 VS and Synchro machines, as well as all the 5" models.

Andy
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Post by Pete. » Mon 12 Jan , 2009 19:35 pm

Thx Andy.
Top
Post Reply

Return to “Downloads”