starmill p.c. t/e

PeterW · Post by **PeterW** » Thu 27 Nov , 2008 16:51 pm

i have aquired a starmill,c/w the desk top tutor,but the membrane or overlay that goes on the keypad was lost.does anyone have one for sale.or where can i buy one .regards peter

Post by **Denford Admin** » Thu 27 Nov , 2008 17:02 pm

we may have some lying around in stores - do you know what it should look like ? Heidenhain or Fanuc or other ?

There should be a starmill or dos milling manual in the downloads section that could give you clues.

PeterW · Post by **PeterW** » Sun 30 Nov , 2008 9:41 am

i think i need some help with this.when i got the star mill it came with the desk top tutor(-the overlay)the power pack. the leads all the manuals.tooling,and original paperwork.so in order to find out if this is heidenhain or fanuc or other.do i need to hook this up to a pc.if so is it possible to still get the software and will i need a dongle. for the soft ware with it being so old. as you have guessed by now i am a complete novice to cnc.
regards peterw

Post by **Denford Admin** » Mon 01 Dec , 2008 10:06 am

The old dos software can be downloaded here:
https://website.denford.ltd.uk/support/9 ... s-software
(There are also license codes there free to download)

As for manuals, look in the download section in this forum and our website here:
https://www.denford.ltd.uk/index.php?opt ... &Itemid=52

Denford Software & Machines

Denford Software & Machines

starmill p.c. t/e

starmill p.c. t/e

star mill