Hi,
I am selling one of my Denford Triac milling machines in amasing condition. Its 100% fully working with user manual etc.
You wont find one in better condition!
ebay link here
https://cgi.ebay.co.uk/Denford-Triac-CNC ... .m14.l1318
If you have any questions just ask
Regards
Denford Triac, Superb condition, fully working.
Moderators: Martin, Steve, Mr Magoo
-
Grant_robochallenge
- Posts: 11
- Joined: Wed 13 Aug , 2008 8:37 am
-
Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Nor olderYou wont find one in better condition!
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
-
SimonRafferty
- CNC Expert
- Posts: 102
- Joined: Tue 12 Aug , 2008 15:53 pm
- Hardware/Software: Denford Cyclone P
EMCO PC Mill 100
Solidworks 2018
SimSolid - Location: Horsham, UK
- Contact:
-
Grant_robochallenge
- Posts: 11
- Joined: Wed 13 Aug , 2008 8:37 am