How do I get a Desk Top Tutor to run on VR Milling V5 ?
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
How do I get a Desk Top Tutor to run on VR Milling V5 ?
How do I get a Desk Top Tutor to run on VR Milling V5 ?
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
This has been asked before 
There are .keys files in
C:\Program Files\Denford\VRMilling5 - or wherever the vrmilling5.exe is located.
You select the COM port and the .KEYS file to use in setup->machine parameters -> denny in VR Milling 5 under Input / Output Devices
I think you may want to use Fanuc0M.keys (depends on the overlay you have)
Its best if you restart VR Milling now.