TDS/25/B/D Linishing machines,wiring diagram required

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

TDS/25/B/D Linishing machines,wiring diagram required

Post by bradders » Mon 28 Apr , 2008 15:15 pm

I am after a wiring diagram for one of your linishing machines. The Model is TDS/25/B/D. Serial No BD26100A. Voltage 415. .75HP. Date Oct 1990.
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Post by Andy B » Wed 30 Apr , 2008 8:17 am

You could try this:
SK618 TDS 25 3ph Wiring Diagram or
A3-800006 - TDS25 with remote control 3 ph.


And whilst having a look through the SK numbers, if you come across SK831 and SK839 (both for Senior Millers) I'd like a copy.

Andy
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Wed 30 Apr , 2008 11:08 am

Andy,

Can you check that the A3-800006 is the correct No, i cannot see any A3-8 in the drawing registry
Attachments
SK618 and SK618A.pdf
(864 KiB) Downloaded 943 times
SK831 and SK839.pdf
(71.52 KiB) Downloaded 1922 times
Top
jpopowski
Posts: 8
Joined: Tue 30 Apr , 2013 12:16 pm

Re: TDS/25/B/D Linishing machines,wiring diagram required

Post by jpopowski » Sun 27 Feb , 2022 18:34 pm

Can anyone tell me the length!/circumference of the 150mm wide linishing belt on a Viceroy TDS 25 machine?

JPopowski
Top
Post Reply

Return to “Viceroy”