Triac upgrade

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
hunsley
Posts: 1
Joined: Tue 18 Sep , 2007 15:00 pm

Triac upgrade

Post by hunsley » Tue 18 Sep , 2007 15:16 pm

cannot get our triac upgrade to accept an exported dxf file, get error mesage line 2, error in code, token not recognised
can any 1 help?
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Wed 19 Sep , 2007 10:11 am

What software are you running with the Triac?

How are you trying to open the DXF

Can you e-mail or upload the dXF so we can check it is OK?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Mon 24 Sep , 2007 10:43 am

I think you need to be on the latest verison of VR Milling v5.

This version will automatically detect the .dxf file extension and load up the DXF import wizard.

It sounds like it is currently trying to open the DXF file directly into the editor, and producing a token not recognised error
Top
Post Reply

Return to “Triac”