Hello,
anybody know where to get the 10mm tee bolts to fit the triton pro?
Thanks for any info.
p.s. is it TRITON as in greek mythology ?
Triton tee bolts
Moderators: Martin, Steve, Mr Magoo
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
ebay best bet.
I've got ones with M8 studs & they work great, as the slots are 10.0001 wide you will have trouble with M10 studs!
I've got ones with M8 studs & they work great, as the slots are 10.0001 wide you will have trouble with M10 studs!

Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
- Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
& have you seen their trojan tales on their site?We were going to call it Trojan, until the US told us what the brand was in America


Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
- Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: