Hi there,
I'm having problem with my robot which out of battery. I already change it to a new batt. But, all the setting also missing. There's any way to get this setting back?[/b]
Mitsubishi RV-1 Robot
Moderators: Martin, Steve, Mr Magoo
Mitsubishi RV-1 Robot
260699
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Please read pages 2-10 and 2-11 of the RV-M1 Movemaster Manual
Eg
Before the drive unit is first turned on after the battery has been installed, be sure to flip down (to the OFF postion) bit 2 of SW1 located inside the side door of the unit. After the power has been turned ON, flip up (To the on Position) Bit 2
Eg
Before the drive unit is first turned on after the battery has been installed, be sure to flip down (to the OFF postion) bit 2 of SW1 located inside the side door of the unit. After the power has been turned ON, flip up (To the on Position) Bit 2