I am about to change the bios/cmos-battery on the pc. Are there any special precaution/procedyre around this batterychange ?
Site Admin
Our service guy says that there is nothing to it if its a DOS machine with a PC box in the cabinet
In this case, it will just need powering off, change the battery, power back on and reset the time and possibly the floppy disk drive type in the BIOS.
If its a rack card PC board, then it would be a bit more involved.
In this case, it will just need powering off, change the battery, power back on and reset the time and possibly the floppy disk drive type in the BIOS.
If its a rack card PC board, then it would be a bit more involved.