- 20210622_172205.jpg (559.89 KiB) Viewed 16293 times
- 20210619_122015.jpg (197.23 KiB) Viewed 16293 times
CNC Apprentice
Posts: 47
Joined: Tue 09 Jul , 2013 20:45 pm
Hardware/Software: 1996 Novamill, linuxcnc
1986 Triac PNC, linuxcnc
1989 Senior 3c, Heidenhain TNC155
1986 Triac PNC, linuxcnc
1989 Senior 3c, Heidenhain TNC155
CNC Apprentice
Wondering if anyone has a manual or any documentation pertaining to the asr servotron tfm servo amplifier as fitted to the 3c (tnc155 control) x axis motor appears to not be energising while z and y do. Z and Y do suffer from creep once energised.
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK
CNC Guru
Hi,
I've looked through all the documentation that I have, but there is very little on the 3C machines.
The wiring diagrams have already been posted. The only other relevant file is the Heidenhain TNC 151 / 155 operating manual.
Andy
I've looked through all the documentation that I have, but there is very little on the 3C machines.
The wiring diagrams have already been posted. The only other relevant file is the Heidenhain TNC 151 / 155 operating manual.
Andy
CNC Apprentice
Posts: 47
Joined: Tue 09 Jul , 2013 20:45 pm
Hardware/Software: 1996 Novamill, linuxcnc
1986 Triac PNC, linuxcnc
1989 Senior 3c, Heidenhain TNC155
1986 Triac PNC, linuxcnc
1989 Senior 3c, Heidenhain TNC155
CNC Apprentice
Cheers Andy, I did think it was a long shot.
I have contacted ABB uk (who own baldor and asr) and they directed me to sms automation. Still waiting for a reply to several emails.
I have done a bit of testing with the board and found the transistors on the x channel have failed so I'm just waiting for replacements to arrive. I'm just hoping the transistors were at fault and not just the outcome of another.
I already have the tnc 155 operators /programming manual and the service manual. Was there ever a machine manual?
I have contacted ABB uk (who own baldor and asr) and they directed me to sms automation. Still waiting for a reply to several emails.
I have done a bit of testing with the board and found the transistors on the x channel have failed so I'm just waiting for replacements to arrive. I'm just hoping the transistors were at fault and not just the outcome of another.
I already have the tnc 155 operators /programming manual and the service manual. Was there ever a machine manual?