All info relating to the Denford MicroRouter Compact small routing machines
Moderators: Martin, Steve, Mr Magoo
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Wed 08 Nov , 2017 19:05 pm
Hi I purchased a second hand micro router and have no software or drivers for it can you purchase these and how much many thanks
-
TDIPower
- CNC Guru

- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Post
by TDIPower » Fri 10 Nov , 2017 23:41 pm
You can, best if you can post up the specs of the machine off the info sticker on the side, it would be worth just popping the cover off and a photo of the control boards too.
Pete
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Sat 11 Nov , 2017 16:06 pm
Hi thank you for your reply this is what I have
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Sat 11 Nov , 2017 16:42 pm
Hi I have taken pictures but can not upload them on the black box it came with says
Model micro router
S/n 90827B
Despatch date August 1999
Electric s/n oc00217397
Software version 2.102
Hope this helps many thanks Steve
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Mon 03 Jun , 2019 16:24 pm
Hi dose anyone know where I can get a belt from as mine has snapped thanks
-
Martin
- CNC Guru

- Posts: 1916
- Joined: Fri 24 Feb , 2006 17:09 pm
- Location: Brighouse
Post
by Martin » Wed 05 Jun , 2019 10:47 am
Which belt do you have?
We fitted a blue spine type belt on the early machines & then changed over to a tooth belt.
If you can add a picture to clarify.
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Wed 05 Jun , 2019 10:56 am
Hi it’s the blue spine one thanks steve
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Wed 05 Jun , 2019 12:12 pm
Hi this is what it looks like
-
Attachments
-

- 7FE743D4-A531-4DC1-A5AB-999C682FFF00.jpeg (408.45 KiB) Viewed 24310 times
-
bradders
- CNC Guru

- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
-
Contact:
Post
by bradders » Thu 06 Jun , 2019 11:19 am
We have one spider belt left in stock.
£30.00 + £5.00 first class post + VAT
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Thu 06 Jun , 2019 12:20 pm
Ok thank you very much I will ring up
-
Taggy
- Posts: 8
- Joined: Wed 08 Nov , 2017 18:39 pm
Post
by Taggy » Fri 14 Jun , 2019 11:28 am
Hi can I please remind you I am still waiting for your finance department to get in touch thanks Steve