Change to the tool selection so that the billet when using a 4th axis will not rotate the billet back to zero degrees when a new tool is selected.
Download the latest version on this page:
https://website.denford.ltd.uk/index.php ... -downloads
VR Milling v5.61 released 5th October 2015
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: