fanuc with mirac

All info relating to the Denford Mirac lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
gilles310
Posts: 23
Joined: Thu 13 Mar , 2014 9:34 am

fanuc with mirac

Post by gilles310 » Mon 02 Feb , 2015 9:12 am

hi
did someone know what is the exactly kind of fanuc used with mirac lathe?
gilles

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: fanuc with mirac

Post by Martin » Mon 02 Feb , 2015 23:03 pm

G & M codes

gilles310
Posts: 23
Joined: Thu 13 Mar , 2014 9:34 am

Re: fanuc with mirac

Post by gilles310 » Tue 03 Feb , 2015 15:46 pm

thank for the answer martin. my question was not clear :oops: :
but i asked version of fanuc with mirac: ot,om, 20TA, 21I, else?
gilles

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: fanuc with mirac

Post by Martin » Tue 03 Feb , 2015 23:46 pm

I dont think we have ever made a mirac with a true Fanuc control fitted.

gilles310
Posts: 23
Joined: Thu 13 Mar , 2014 9:34 am

Re: fanuc with mirac

Post by gilles310 » Wed 04 Feb , 2015 8:57 am

thank martin
the idea is to know if it's possible to adapt a post pro for featurecam, mastercam, etc to work with a mirac.
unfortunately, denford don't sell softs if you're not a school.
gilles

Post Reply