Mines starting to go rusty?
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Starmills with ATC
CNC Expert
Anyone got any tips for coolant compartment maintenance?
Mines starting to go rusty?
Mines starting to go rusty?
CNC Guru
Posts: 615
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
CNC Guru
a good degrease and a coat of smooth or hammerite. let it have the full time to harden off.
Or some other suitable/durable paint
Or some other suitable/durable paint
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Starmills with ATC
CNC Expert
cool thanks
CNC Apprentice
Posts: 35
Joined: Mon 22 Nov , 2010 16:38 pm
CNC Apprentice
I actually added a thin layer of car body filler to the bottom of my tank and covered it with a very thin sheet of aluminium (no paint). Working very well thus far. Sealed up the edges with sealant used for ducting (sets like concrete).