280VS and Synchro drawings and data

Post by **Denford Admin** » Thu 12 Aug , 2010 9:50 am

Parts lists for vari-speed lathes - 280VS and Synchro

https://www.denfordata.com/downloads/for ... 8-1979.pdf (36Mb)

280VS Headstock Arrangement.pdf

Bogus105 · Post by **Bogus105** » Fri 02 Nov , 2012 15:08 pm

Hi,

Have you got similar scan of headstock arrangement but for TDS 1/1 GBL lathe? I'm looking for any explaination on how headstock and bed are aligned? What is the purpouse of headstock strip ( ML100/405 item)?

Post by **Denford Admin** » Mon 05 Nov , 2012 10:26 am

Not sure if this has already been posted but it may contain something similar:
viewtopic.php?f=50&t=3921

Andy B · Post by **Andy B** » Mon 18 Aug , 2014 9:15 am

Wiring diagrams for 280VS and Synchro lathes:
SK 601, SK601A & SK601B - 280VS lathes with pendant control box, 3ph & 1ph
SK633 & SK634 - Synchro & TDS1 lathes, 3ph & 1ph
SK641 - Synchro control box

Andy B · Post by **Andy B** » Thu 24 Nov , 2016 22:30 pm

Tailstock Arrangement and detail drawings (and some mod notes)

Drawing Numbers:
BVS 100/750
BVS 100/751
MVS 100/709(A)
MVS 100/709(B)
MVS 100/706(A)
BVS 100/706
MVS 100/706(B)
MVS 100/705M
MVS 100/705
MVS 100/708(B)
MVS 100/708(A)
BVS 100/752
MVS 100/707
MVS 100/708
MVS 100/704(A)
MVS 100/704(B)
MVS 100/705E

Andy B · Post by **Andy B** » Wed 02 Aug , 2017 19:14 pm

Wiring diagrams:
A3-500018A
A3-500018
A3-500016
A3-500015
A3-500014

280 Synchro Wiring.pdf: 280 Synchro Wiring; (1.25 MiB) Downloaded 1028 times

and
A3-500024
A3-500024A

A3-500024.pdf: (1.6 MiB) Downloaded 687 times

Andy B · Post by **Andy B** » Tue 01 Jun , 2021 14:53 pm

BVS 110-400 Bed Arrangement

BVS110-400 Bed Arrangement.pdf: (784.69 KiB) Downloaded 1318 times

BVS 100-402 Bed

BVS100-402 BVS & Synchro Std Bed (with sump).pdf: (531.72 KiB) Downloaded 1293 times

Please don't add comments to this thread.

Andy B · Post by **Andy B** » Mon 21 Jun , 2021 7:58 am

Manual for the 280VS:

Viceroy-280-vs-lathe-installation-manual.pdf: (1.99 MiB) Downloaded 1312 times

Hans J Cyranski · Post by **Hans J Cyranski** » Tue 06 Jul , 2021 19:02 pm

Hi everybody,

my name is Hans Jürgen and I am from Germany.
Since 40 years I own a Denford Viceroy 280 lathe in metric version and long bed ( 1 meter between centers ),
which I bought brand-new from a local dealer.
It is the version MVS , manual variable speed with hand wheel control.
It is most completely equipped with all available attachments and extras from that time.
Unfortunately, the documents and arrangement drawings that came with the lathe are for the last version 280VS with motor driven variable speed.

The lathe is still in very good condition, but I would like to replace the crossfeed and compound spindle and nuts, these are the most worn parts.
Trapez thread 1/2" x 2.5 mm, special thread to Denford specification.

Can anybody help with original manufacturing drawings for spindles and nuts ? I had them downloaded previously from this forum,
but somehow I lost them and cannot find them again.

Also, I would like to have the original arrangement drawings for the Headstock and Drive Arrangement for my lathe version.

Of course, all available drawings would be welcome.

You can contact me via Email: juergencyranski@aol.com.

Many thanks for your support.

Best Regards

Hans Jürgen Cyranski

Denford Software & Machines

Denford Software & Machines

280VS and Synchro drawings and data

280VS and Synchro drawings and data

Re: 280VS Headstock Arrangement on pdf

Re: 280VS Headstock Arrangement on pdf

Re: 280VS Headstock Arrangement on pdf

Re: 280VS and Synchro drawings

Synchro Wiring drawings

Re: 280VS and Synchro drawings

280VS Manual

Re: 280VS and Synchro drawings and data