If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Thu 24 Aug , 2006 21:50 pm
-
HunterScotty
- Posts: 10
- Joined: Sat 02 Dec , 2006 21:12 pm
- Location: Scotland
-
Contact:
Post
by HunterScotty » Sun 03 Dec , 2006 14:58 pm
This is the one!!!
I've seen the shell of one of these when I was a student! - Weird Looking thing!!!
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Tue 05 Dec , 2006 12:58 pm
A 7 page article - amazing !
Someone said they have seen a Tristar lying around in the sheds here - I'll have a look
-
davidimurray
- CNC Expert

- Posts: 194
- Joined: Thu 24 Aug , 2006 9:45 am
Post
by davidimurray » Tue 05 Dec , 2006 14:09 pm
Someone said they have seen a Tristar lying around in the sheds here - I'll have a look
Lying round the shed - you have these sort of things lying round - don't let me near there - I would be in heaven!!!
-
Triac whizz
- CNC Expert

- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Post
by Triac whizz » Tue 05 Dec , 2006 15:06 pm
If you find it I'll take it off your hands, that'll be a good talking point on the mantelpiece
...bubblegum machine...
can it be converted to take euros

Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
-
Steve
- CNC Guru

- Posts: 1451
- Joined: Tue 21 Feb , 2006 16:15 pm
- Location: Denford UK
Post
by Steve » Tue 05 Dec , 2006 18:00 pm
We have allsorts lying round in the sheds
I will ask Admin to photograph some of the obsolete stock and post the picks.
We dont want to go through all the bits but if someone wanted to Ebay the lot they could make some money at it, we just dont have time!
There are several old controls servo motors, turrets ac motors contactors etc...etc...
We will sell a job lot for a few grand!!
-
Triac whizz
- CNC Expert

- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Post
by Triac whizz » Tue 05 Dec , 2006 18:40 pm
consider me interested....
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
-
Steve
- CNC Guru

- Posts: 1451
- Joined: Tue 21 Feb , 2006 16:15 pm
- Location: Denford UK
Post
by Steve » Tue 05 Dec , 2006 19:19 pm
We have cleared out the stores and keep holding onto stuff thats too good to throw out
Trouble is it never gets used and we dont have a full inventry of what we have or if it works.
We also have an old bar store with racks and materials that have been here for years.
anyone interested can come and have a look round then make a bid.
You will need a big van though

-
Triac whizz
- CNC Expert

- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Post
by Triac whizz » Tue 05 Dec , 2006 19:31 pm
You will need a big van though
got one of those already
how do you think all my toys got here!
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
-
davidimurray
- CNC Expert

- Posts: 194
- Joined: Thu 24 Aug , 2006 9:45 am
Post
by davidimurray » Wed 06 Dec , 2006 9:41 am
If I had the room I would be up there like a flash - don't think my other half would be too happy though - I might be getting a motorbike to strip to sell in the next few weeks and I don't know if she has realised it is going in the house!!!!
Triac Whizz - you can open up the Denford supply store!!
Cheers
Dave