Hello all!
I have an Easimill s/n EM26108A with Heidenhain TNC 355 (Feb 1989)
Can anyone help me out with a set of machine wiring schematic drawings please?
Easimill TCN355 machine wiring schematics
Moderators: Martin, Steve, Mr Magoo
-
Burrowtech
- Posts: 2
- Joined: Wed 12 Jun , 2013 9:04 am
- Hardware/Software: Easimill with Heidenhain TNC 355
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Easimill machine wiring schematics
Sorry I've never seen any drawings for a Heidenhain version of that machine.
The best we have are the TNC manuals:
viewtopic.php?f=15&t=2256
The best we have are the TNC manuals:
viewtopic.php?f=15&t=2256
-
Burrowtech
- Posts: 2
- Joined: Wed 12 Jun , 2013 9:04 am
- Hardware/Software: Easimill with Heidenhain TNC 355
Re: Easimill machine wiring schematics
Hello all
I have now spent some time tracing wiring and have now created some schematics; they are a bit simplistic at the moment but if anyone is in a similar predicament, then I may be able to help you out a little.
I have now spent some time tracing wiring and have now created some schematics; they are a bit simplistic at the moment but if anyone is in a similar predicament, then I may be able to help you out a little.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Easimill machine wiring schematics
Thanks, it'd be great if you could zip them or .pdf them and post up here...anyone with an Heidenhain control would find them useful.