Specification/Maunal for starmill

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Specification/Maunal for starmill

Post by andy_con » Sat 01 Jun , 2013 9:23 am

as title really, anyone got a manual with spec in for the starmill?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Specification/Maunal for starmill

Post by Denford Admin » Mon 03 Jun , 2013 11:56 am

viewtopic.php?f=45&t=4181
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Mon 03 Jun , 2013 17:00 pm

many thanks, that page didn't come up when I did a search.

ah bugger if no ATC then R8, so no retro fitting and ATC for me then :(
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Specification/Maunal for starmill

Post by Denford Admin » Mon 03 Jun , 2013 17:04 pm

No, I only just posted it up - scanned a lot of stuff a while back but haven't uploaded it all so it's worth asking!
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Mon 03 Jun , 2013 17:18 pm

ah well all info welcome

many thanks
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 12:37 pm

random quesion which im not sure if admin/denford can anwser, but the power drawbars used on novamills and starmill were they custom made by denford or off the shelf items?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Specification/Maunal for starmill

Post by Denford Admin » Thu 06 Jun , 2013 13:45 pm

We designed the mechanism (eg, springs and actuating lever) but bought in the air intensifier (From Parker.com I believe)
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 13:50 pm

such a shame you guys dont offer any kind of upgrades service for older machines, im gagging for an ATC on my starmill.

you dont happen to have a spare power drawbar in a shed out back somewhere do you lol (joking)

i will check out parker, many thanks

**update

would you have any parts numbers or anything from parkers?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Specification/Maunal for starmill

Post by Denford Admin » Thu 06 Jun , 2013 13:54 pm

VB489C :)
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 14:09 pm

awesome, thanks
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 19:13 pm

does anyone know if this mod (raising column) will work on a starmill?

viewtopic.php?f=41&t=3585
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Specification/Maunal for starmill

Post by Denford Admin » Fri 07 Jun , 2013 9:13 am

As far as I know, they are the same castings...Part number RM 1/301
Attachments
RM1_301_V6.pdf
(147.41 KiB) Downloaded 1118 times
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Fri 07 Jun , 2013 12:34 pm

ok cool thanks, the only thing I note is the bar going through the head for the lid which would need to be redrilled
Top
Post Reply

Return to “StarMill”