SPindle control OF NOvaturn

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

SPindle control OF NOvaturn

Post by deejay » Tue 21 May , 2013 1:55 am

How does the novaturn cnc control the spindle motor, does the machine contains a VFD?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: SPindle control OF NOvaturn

Post by Denford Admin » Tue 21 May , 2013 9:17 am

It's probably got a Sprint drive and SEM motor
S.E.M MT30U4-36
Spindle drive:SPRINT 1200

viewtopic.php?f=15&t=2230&view=next
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Thu 23 May , 2013 17:07 pm

thanks much.
one more question though, what brand stepper does the machine (Novaturn) usually comes with?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: SPindle control OF NOvaturn

Post by Denford Admin » Fri 24 May , 2013 9:03 am

If you gave us the serial number of the machine we can probably post the original inspection sheet which will answer all these.
A novamill from yr 2000 has
x-axis SANYO 103-770-1640 30V DC
y-axis SANYO 103-770-1640 30V DC
z-axis SANYO 103-807-0645 30V DC
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Fri 24 May , 2013 16:01 pm

For the Novaturn

serial: H00531
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Fri 24 May , 2013 16:02 pm

yr 2000
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: SPindle control OF NOvaturn

Post by Denford Admin » Fri 24 May , 2013 16:19 pm

The document for H00531 has already been posted:
viewtopic.php?t=3895
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Sun 26 May , 2013 22:40 pm

thanks admin...
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Wed 29 May , 2013 2:07 am

Could you tell me the pulley ratio for the Novaturn Spindle unit?

Thank you
Top
deejay
Posts: 15
Joined: Fri 16 Nov , 2012 17:43 pm
Hardware/Software: NovaMill and NovaTurn

Re: SPindle control OF NOvaturn

Post by deejay » Wed 29 May , 2013 6:29 am

the version is a yr 2000
Top
Post Reply

Return to “Novamill”