Cheap 1/1 GB on Ebay

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
paulmo101
CNC Apprentice
CNC Apprentice
Posts: 57
Joined: Thu 24 May , 2007 16:32 pm

Cheap 1/1 GB on Ebay

Post by paulmo101 » Wed 08 May , 2013 19:36 pm

Hi

Just spotted on ebay

https://www.ebay.co.uk/itm/Viceroy-TDS1- ... _234wt_958

Nothing to do with me but price is only at £1.20 and it has both steadies plus other stuff.

Hope its Ok to post the link?

Cheers

Paul
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Cheap 1/1 GB on Ebay

Post by Denford Admin » Thu 09 May , 2013 8:56 am

It'll be interesting to see what it goes for...starting so low should get it to a fair price.

Hope the owner doesn't mind, I've taken a copy of his photos for future reference.
Attachments
viceroy-on-ebay.jpg
viceroy-on-ebay.jpg (286.47 KiB) Viewed 6088 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Cheap 1/1 GB on Ebay

Post by Denford Admin » Fri 10 May , 2013 8:45 am

Does anyone know if it sold ?
ebay just shows it ended and the starting price of 50p :?
Top
paulmo101
CNC Apprentice
CNC Apprentice
Posts: 57
Joined: Thu 24 May , 2007 16:32 pm

Re: Cheap 1/1 GB on Ebay

Post by paulmo101 » Fri 10 May , 2013 9:03 am

Hi

I think the seller added a footnote that it was for sale elsewhere so he has probably sold it privately.

It looked a decent machine and I would think he would have got a least £700 - £800.

Cheers

Paul
Top
LesT
CNC Expert
CNC Expert
Posts: 119
Joined: Wed 11 Aug , 2010 14:17 pm
Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc.
Location: Scotland !

Re: Cheap 1/1 GB on Ebay

Post by LesT » Wed 15 May , 2013 19:57 pm

There was also a mention of a buy-it-now price and a Phone number.
Ebay don't like that AFAIK.
Top
Post Reply

Return to “Viceroy”