The current version of software for the UP! Printer can be downloaded from this site:
https://www.pp3dp.com/index.php?option=c ... ry&catid=1
The latest version of Software for the UP! can be found here
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: The latest version of Software for the UP! can be found
The latest version 1.17 is now available (October 2012)
New firmware (ROM) files are included which will now allow the UP! Printer to create prints down to 0.015mm layer thickness
The UP! Mini will now allow 0.020mm layer thickness
New firmware (ROM) files are included which will now allow the UP! Printer to create prints down to 0.015mm layer thickness
The UP! Mini will now allow 0.020mm layer thickness
-
ianlpowell
- Posts: 3
- Joined: Fri 02 Nov , 2012 13:30 pm
- Hardware/Software: UP! 3D Plus Printer
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: The latest version of Software for the UP! can be found
1.17 is officially released now.
There is a 1.18 beta also available which has software platform level compensation in it.
I can't find the link because the pp3dp forum is down (yet again)
There is a 1.18 beta also available which has software platform level compensation in it.
I can't find the link because the pp3dp forum is down (yet again)
-
ianlpowell
- Posts: 3
- Joined: Fri 02 Nov , 2012 13:30 pm
- Hardware/Software: UP! 3D Plus Printer
Re: The latest version of Software for the UP! can be found
I have just managed to downloaded version 1.17 but when I try and run the setup program I get a message saying it is not compatible with my version of windows.
I am running Windows 7 Ultimate 64bit. I don’t usually have any problems with 32 bit programs only drivers.
I have no problem with version 1.6. Also I have tried downloading a second time in case it got corrupted.
Any ideas?
I am running Windows 7 Ultimate 64bit. I don’t usually have any problems with 32 bit programs only drivers.
I have no problem with version 1.6. Also I have tried downloading a second time in case it got corrupted.
Any ideas?
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: The latest version of Software for the UP! can be found
It appears that either the source file is corrupt or it is getting corrupted during transfer...I've just downloaded it and it won't install for me either.
Luckily I still have the 1.17 file I downloaded previously and have posted it here:
https://www.denfordata.com/downloads/up1.17_setup.exe
Luckily I still have the 1.17 file I downloaded previously and have posted it here:
https://www.denfordata.com/downloads/up1.17_setup.exe
-
ianlpowell
- Posts: 3
- Joined: Fri 02 Nov , 2012 13:30 pm
- Hardware/Software: UP! 3D Plus Printer
Re: The latest version of Software for the UP! can be found
Thanks that works now.