viceroy 280vs nylon selector gear.

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Dave B
Posts: 2
Joined: Fri 06 Jul , 2012 13:40 pm
Hardware/Software: viceroy 280vs
Location: Stoke on trent
Contact:

viceroy 280vs nylon selector gear.

Post by Dave B » Sat 07 Jul , 2012 14:17 pm

Hi i have a problem with missing teeth on the small nylon selector gear in my 280vs head stock,does anyone make spares.

Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: viceroy 280vs nylon selector gear.

Post by Pete. » Sat 07 Jul , 2012 19:39 pm

Hi Dave.

I have made a couple. I could possibly make another but I'm very busy right now. In a couple of weeks my workload should relax so if you can wait a while I might be able to help.

Pete.

Dave B
Posts: 2
Joined: Fri 06 Jul , 2012 13:40 pm
Hardware/Software: viceroy 280vs
Location: Stoke on trent
Contact:

Re: viceroy 280vs nylon selector gear.

Post by Dave B » Sun 08 Jul , 2012 12:49 pm

Hi pete that would be great, the ony problem i have is that i use the lathe every day for my buisness so need one asap it wont stay in gear without tying the leaver to the door handle

Dave

Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: viceroy 280vs nylon selector gear.

Post by Pete. » Sun 08 Jul , 2012 17:31 pm

Funny - that's what I had to do with a bungee hook :D

I'll see what I can do.

Post Reply