Hi,
I have a novamill running vr milling, but I dont have any software to write the code. Are there any programs that stand out as being good. I know denford's quickcam pro will prob be the answer but im a private individual so i dont think i can get hold of a copy. im happy to buy software if needed.
thanks for any help.
Giles
which is the best gcode software for vrmilling
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: which is the best gcode software for vrmilling
Private individuals can purchase Denford software.
Quickcam Pro can import, .STL, JPG, JPEG, BMP etc but you cannot draw / design in it, it converts the files to a G and M code program that will run on VR Milling that controls your machine.
Quickcam Pro can import, .STL, JPG, JPEG, BMP etc but you cannot draw / design in it, it converts the files to a G and M code program that will run on VR Milling that controls your machine.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: which is the best gcode software for vrmilling
There are also lots of possibly cheaper alternatives for the hobbyist.
See the top post here for some names to start with:
viewforum.php?f=60
See the top post here for some names to start with:
viewforum.php?f=60