Viceroy lathe nut wanted

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
gordon
Posts: 2
Joined: Mon 30 Apr , 2012 15:16 pm

Viceroy lathe nut wanted

Post by gordon » Tue 01 May , 2012 17:30 pm

Wanted. Cross slide nut for MK2 Viceroy lathe.
Serial number: 29515

Gordon.
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Viceroy lathe wanted

Post by Andy B » Wed 02 May , 2012 10:55 am

I can't help with a part - but do you want metric or imperial??

Andy
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: Viceroy lathe wanted

Post by Pete. » Wed 02 May , 2012 18:57 pm

Gordon look up my previous post on how to make a new nut from acetal. Mine is still working perfectly with no back-lash.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Viceroy lathe nut wanted

Post by Denford Admin » Fri 04 May , 2012 13:31 pm

The Delrin nut post is here:
viewtopic.php?f=4&t=3034

Does anyone know the author of the original "Making acetal nuts" post ? I wondered whether to copy the images into this forum for safekeeping...?
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: Viceroy lathe nut wanted

Post by Pete. » Fri 04 May , 2012 18:23 pm

Denford Admin wrote:The Delrin nut post is here:
viewtopic.php?f=4&t=3034

Does anyone know the author of the original "Making acetal nuts" post ? I wondered whether to copy the images into this forum for safekeeping...?
The author is Evan Williams.
I'll ask hm if he's ok with it.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Viceroy lathe nut wanted

Post by Denford Admin » Tue 08 May , 2012 10:20 am

As he said it was OK, I've copied the best bit from the other forum to here:
viewtopic.php?f=50&t=3727
Top
gordon
Posts: 2
Joined: Mon 30 Apr , 2012 15:16 pm

Re: Viceroy lathe nut wanted

Post by gordon » Sun 13 May , 2012 17:44 pm

thanks for the replys on viceroy lathe nut
gordon
Top
Post Reply

Return to “Viceroy”