ZeroCentre / ZeroTurn / ZeroBore Image gallery
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
ZeroCentre / ZeroTurn / ZeroBore Image gallery
ZeroCentre / ZeroTurn / ZeroBore Image gallery
- Attachments
-
- zerobore.jpg (66.85 KiB) Viewed 16607 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery
Some photos of a used Zero Centre (advertised on ebay May 2011)
Seemingly, we only made 14 of these!
Seemingly, we only made 14 of these!
- Attachments
-
- ZeroCentreUsed3.jpg (60.97 KiB) Viewed 16441 times
-
- ZeroCentreUsed2.jpg (47.89 KiB) Viewed 16441 times
-
- ZeroCentreUsed1.jpg (55.51 KiB) Viewed 16441 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery
A Zeroturun with fanuc control:
- Attachments
-
- zeroturn-fanuc.jpg (45.71 KiB) Viewed 16268 times
-
inovar
- Posts: 4
- Joined: Fri 22 Mar , 2013 17:39 pm
- Hardware/Software: Denford Zeroturn S/NZT-10097A Fanuc OT control
- Location: Perth Australia
Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery
Here are some images of the Denford ZeroTurn with Fanuc OT control that I have just purchased second hand of course.
- front.jpeg (140.21 KiB) Viewed 16053 times
- control.jpeg (118.66 KiB) Viewed 16053 times
- turret.jpeg (126.58 KiB) Viewed 16053 times
- collet head.jpeg (248.78 KiB) Viewed 16053 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery
As this machine didn't have an operators manual, I presume mode changing was carried out on screen with the "Software Operator Panel" option.
Parameter: 908.7 (eg 1000 0000)
Parameter: 908.7 (eg 1000 0000)