Hi.
Just thought I'd post a picture of a project I'm working on.
We will be having our student awards ceremony at the end of April here at the NSSC. We like to give our winning students some sort of gift to mark their achievement. Other years we have purchased small gifts but money is tight so I was asked if I could make something instead. I managed to find a good source of reclaimed wood, got busy on SolidWorks and 2D Design and came up with this. I am using a 2600 Pro for the machining and a VLS 3.50 for the laser work. I need to make about 10, will post pictures of the finished articles when complete.
Prototype of trophy
Moderators: Martin, Steve, Mr Magoo
-
richgirling
- Posts: 17
- Joined: Thu 17 Jun , 2010 11:03 am
Prototype of trophy
- Attachments
-
- IMAG0765-1.jpg (117.13 KiB) Viewed 7348 times
-
richgirling
- Posts: 17
- Joined: Thu 17 Jun , 2010 11:03 am
Re: Prototype of trophy
As promised a photo of the finished products with all laser work done and a couple of coats of Danish oil.
Great active forum you have here!
Great active forum you have here!
- Attachments
-
- IMAG0882-1-1.jpg (48.28 KiB) Viewed 7316 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Prototype of trophy
Thanks for taking the time to show your work...unfortunately most people only come here when they have a problem
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Prototype of trophy
Great job Rich.