WANTED Fixed steady for Viceroy tds metal working lathe

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
pipemaker
Posts: 4
Joined: Mon 05 Mar , 2012 20:59 pm

WANTED Fixed steady for Viceroy tds metal working lathe

Post by pipemaker » Mon 05 Mar , 2012 21:15 pm

Hi, I've searched the forums and the internet looking for one of these for a while now. Can anyone help me to get my hands on one of these, or maybe someone recommend another steady that will match the Viceroy's bed, or possibly the dimensions of the steady so I can make one? Thanks, D.
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by Pete. » Mon 05 Mar , 2012 21:49 pm

Join the queue :D

They are few and far between.
Top
pipemaker
Posts: 4
Joined: Mon 05 Mar , 2012 20:59 pm

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by pipemaker » Tue 06 Mar , 2012 20:39 pm

O well! :cry:
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by Denford Admin » Wed 07 Mar , 2012 10:24 am

Sorry about that, looks like you'd have to make one.
There is a good picture of one that Dazz has:
viewtopic.php?t=791
Maybe he has drawings or can sketch it up for you ?
Also try PMing AndyB in case he has the drawings or knows what I could look for...
Top
pipemaker
Posts: 4
Joined: Mon 05 Mar , 2012 20:59 pm

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by pipemaker » Wed 14 Mar , 2012 19:23 pm

Hi, thanks. I'll try PMing AndyB .
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by Pete. » Wed 14 Mar , 2012 20:00 pm

He did say he was going to dig them out so someone could knock up a mould for casting. I reckon an aluminium casting would be pretty good for a fixed steady.
Top
pipemaker
Posts: 4
Joined: Mon 05 Mar , 2012 20:59 pm

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by pipemaker » Wed 28 Mar , 2012 15:54 pm

I've had no luck getting a reply, if anyone else can poke him I'd appreciate it! :D
Top
triac
CNC Expert
CNC Expert
Posts: 104
Joined: Fri 15 Dec , 2006 20:18 pm
Location: West Norfolk

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by triac » Tue 19 Jun , 2012 22:36 pm

Hi, another for sale on UK auction site, item Viceroy Denford Lathe Fixed Steady, maybe this one will cost less !!!
Top
Pete.
CNC Expert
CNC Expert
Posts: 284
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Re: WANTED Fixed steady for Viceroy tds metal working lathe

Post by Pete. » Wed 20 Jun , 2012 5:26 am

You could do a good trade if you found a crate full of them!
Top
Post Reply

Return to “Denford Classifieds”