Problem with repeating loops Access Violation 00536740

paul · Post by **paul** » Tue 17 Oct , 2006 12:09 pm

Hi
Can anyone help me with this
When I use a subprogram it works if I do not set a repeat for example

M98 P0080

This calls program 0080, runs it and returns to the main program no problems

But if I want a loop to execute say 10 times according to the help files I write the line as

M98 P100080

When I do this the loop still only executes once then crashes with this message.

Access Violation at address 00536740 in module 'windmill.exe'. Read of address 00000520.

Ive tried it on a few PC's and its always the same
Any ideas would be great thanks.

Paul

Post by **Denford Admin** » Tue 17 Oct , 2006 13:03 pm

I've tried it here and get the same thing.

We'll look at the software to see if there is a workaround or fix

Mr Magoo · Post by **Mr Magoo** » Wed 18 Oct , 2006 12:49 pm

Have you tried putting an 8 digit number in like this...

M98 P00100080

Post by **Denford Admin** » Wed 18 Oct , 2006 18:24 pm

Nah - still won't work - its a problem with both version 2 and 5 of VR Milling

Its sorted now in the next releases

(which will be v2.32 and 5.14)

Information