Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
User avatar
Site Admin
Orac

Post by Denford Admin »

Image

Image
Posts: 11
Joined: Sat 23 Sep , 2006 3:50 am

Post by weegee »

I love that second photo, how it makes the ORAC look so small and portable. As anyone with an orac knows, its still a bit of a lump when it comes to moving it by hand. :D
Posts: 1
Joined: Mon 13 Mar , 2006 12:35 pm
Location: Accrington, UK
The Orac

Post by stevecrowther »

I used to sit at that machine in that very spot in the 'Theatre of Advanced Technology'. You wouldn't believe the number of boxes and other crap we stored behind those curtains. The Orac was a brilliant machine. The version with the cassette for 'Audio Instruction' was just right for playing music. Notice the advanced calculator glued to the machine as well. Early computer stuff!
Oh the memories
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
User avatar
Site Admin

Post by Denford Admin »

You used to sit on that chair then !? - I'm still sat on it now :shock:
CNC Guru
CNC Guru
Posts: 301
Joined: Tue 21 Feb , 2006 21:45 pm
Location: Brisbane, Australia
User avatar
CNC Guru
CNC Guru

Post by Mr Magoo »

Ahhh... Steve Crowther.

I'm sure I've got some photos in storage of you sat in that chair :!:

I'll dig them out one day and post them up here. Good to hear from you.
007
:D
Post Reply

Information

Moderators

Martin, Steve, Mr Magoo