Someone has emailed in:
I am looking for a power indicator light for an old Denford Viceroy Metal Lathe, can you help?
Power indicator light for an old Viceroy Metal Lathe
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Power indicator light for an old Viceroy Metal Lathe
.....eerrrrmmmm....
Bit more clue about which lathe might help!!
And a better description of if it has ever worked, has something been damaged, etc.
Ideally a photo of the panel that the light is on.
Andy
Bit more clue about which lathe might help!!
And a better description of if it has ever worked, has something been damaged, etc.
Ideally a photo of the panel that the light is on.
Andy