Customer writes .................
I need to identify my Denford machine and the size of the morse taper in the tailstock
Viceroy tailstock taper size
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Viceroy tailstock taper size
- Attachments
-
- resized_denford1.jpg (110.38 KiB) Viewed 5205 times
-
- resized_denford2.jpg (111.08 KiB) Viewed 5205 times
-
bikerwookie
- Posts: 18
- Joined: Mon 18 Feb , 2008 14:46 pm
Re: Viceroy tailstock taper size
It looks like a viceroy 280 vs with an mt3 tailstock.
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Viceroy tailstock taper size
Cheers BikerWookie,
Customer --- MT3 = Morse Taper No 3
Customer --- MT3 = Morse Taper No 3
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Viceroy tailstock taper size
A fairly early model 280VS too - it has the nice chromed ball-handles on the top- and cross-slides and dual-scale dials.
Had a bit of a hard life by the looks of it - missing various levers for the power feed & screwcutting.
Andy
Had a bit of a hard life by the looks of it - missing various levers for the power feed & screwcutting.
Andy
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Viceroy tailstock taper size
Andy,
I'm glad you can offer such detailed information on the lathe
I'm glad you can offer such detailed information on the lathe