Easiturn 3 rs232 cable

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Russellpalmer
Posts: 17
Joined: Thu 09 Apr , 2009 12:01 pm

Easiturn 3 rs232 cable

Post by Russellpalmer » Thu 09 Apr , 2009 12:47 pm

Hi

im new to this fourm, just wondering if anybody has any diagrams i can see to make a rs232 cable to interface with my easiturn 3 and my laptop running the easiturn dos software?

many thanks
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 09 Apr , 2009 15:51 pm

I think this link contains RS232 cable drawings:

More old machine software found PLUS Photos and Drawings
viewtopic.php?t=196
Top
Adee
CNC Apprentice
CNC Apprentice
Posts: 43
Joined: Tue 19 Aug , 2008 8:48 am
Location: Hampshire UK
Contact:
Contact Adee

Post by Adee » Thu 09 Apr , 2009 16:40 pm

Hi Russell
If you have any issues connecting up, or formatting your Ind editor, I could forward you my parameters.
I have an old dell cpt330 laptop(win2000) connected to mine for tranfering progs.

Adee
Top
cncbasher
CNC Apprentice
CNC Apprentice
Posts: 50
Joined: Tue 08 Jul , 2008 8:49 am

Post by cncbasher » Thu 09 Apr , 2009 20:36 pm

Adee ,

I'd be interested in parameters and set up too

regards
Dave
Top
Russellpalmer
Posts: 17
Joined: Thu 09 Apr , 2009 12:01 pm

Post by Russellpalmer » Thu 09 Apr , 2009 22:41 pm

hi

many thanks for that, i think ill get an old laptop from ebay cant be much now!! many thanks all ill keep you posted
Top
Russellpalmer
Posts: 17
Joined: Thu 09 Apr , 2009 12:01 pm

Post by Russellpalmer » Thu 16 Apr , 2009 19:32 pm

hi

got an old ibm laptop with 25 pin printer port and 9 pin serial port

a few questions, shall i use the 25 pin port or the 9 pin port to make the cable?

thanks
Top
Post Reply

Return to “EasiMill / EasiTurn”