Fagor 8020T

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Fagor 8020T

Post by Martin » Thu 27 Jul , 2017 8:54 am

Does anyone have a set of electrical drawings for a EasiTurn fitted with a FAGOR 8020 T control.

nemo1966
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Wed 09 Oct , 2013 16:56 pm
Hardware/Software: None yet!

Re: Fagor 8020T

Post by nemo1966 » Sat 15 Aug , 2020 18:00 pm

Got these at present - still looking through pile of manuals.
IMG_20200815_173241950_HDR.jpg
IMG_20200815_173241950_HDR.jpg (65.81 KiB) Viewed 12836 times
IMG_20200815_173231448_HDR.jpg
IMG_20200815_173231448_HDR.jpg (59.48 KiB) Viewed 12836 times
IMG_20200815_173222901_HDR.jpg
IMG_20200815_173222901_HDR.jpg (67.71 KiB) Viewed 12836 times

nemo1966
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Wed 09 Oct , 2013 16:56 pm
Hardware/Software: None yet!

Re: Fagor 8020T

Post by nemo1966 » Mon 17 Aug , 2020 11:35 am

Still need them? Just found a full set with transformer diagrams etc :shock:

nemo1966
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Wed 09 Oct , 2013 16:56 pm
Hardware/Software: None yet!

Re: Fagor 8020T

Post by nemo1966 » Mon 17 Aug , 2020 19:07 pm


Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Fagor 8020T

Post by Martin » Mon 17 Aug , 2020 20:47 pm

Thanks for posting.

ParticleFire
Posts: 2
Joined: Thu 15 Dec , 2022 0:42 am

Re: Fagor 8020T

Post by ParticleFire » Thu 15 Dec , 2022 4:47 am

hi!
Do you still have the Installation and Start-up manual for Fagor 8020T?
I need it and can´t found it!, could you upload it, please?

Thank you!

nemo1966
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Wed 09 Oct , 2013 16:56 pm
Hardware/Software: None yet!

Re: Fagor 8020T

Post by nemo1966 » Fri 10 Mar , 2023 11:35 am

Sorry you message was stuck in my spam trap. I have them bit no way now of copying or uploading.

Post Reply