Denford Software & Machines • Guides to design & manufacture of F1 / Co2 Balsa racing cars

Page 1 of 1

Guides to design & manufacture of F1 / Co2 Balsa racing cars

Posted: Thu 07 Jan , 2010 10:30 am

by Denford Admin

This guide shows how to manufacture F1 R-type cars from a 3D design, using Denford supplied software.
Check the http://www.f1inschools.co.uk website for more recent information, design tutorials and rules.

http://www.denfordata.com/downloads/f1/ ... esktop.pdf
(11Mb .pdf file)

Re: Guides to design & manufacture of F1 / Co2 Balsa racing cars

Posted: Thu 07 Jan , 2010 10:53 am

by Denford Admin

Here also, are some guides to designing the cars in Solidworks (tm)

http://www.denfordata.com/downloads/f1/ ... pe-Car.pdf
http://www.denfordata.com/downloads/f1/ ... v2_ENG.pdf

NB, If you are competing in the F1 In Schools challenge, then please check for the latest rules and regulations...these guides are for reference only and may use sizes and features that are not within current regulations