Viceroy TDS 1 GB Manual

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
paulmo101
CNC Apprentice
CNC Apprentice
Posts: 57
Joined: Thu 24 May , 2007 16:32 pm

Viceroy TDS 1 GB Manual

Post by paulmo101 » Thu 24 May , 2007 16:49 pm

Hi

I am about to buy a tds 1 GB and need a manual. I have downloaded the version on the forum (in the downloads) but the pics are not very clear.
I was wondering if anyone could email good scans of:
Page 2 - Specs Table etc.
Page 8 - Machine diagram with labels
Page 9 - Gearbox instructions with diagram
Page 10 Parts Diagram
Also any links etc. to above machine info.
Or post photocopys of above and I will cover costs.
Hopefully I may be able to post some pics when the machine is collected and cleaned etc.
My Details
Email: paul.morrey@ntlworld.com
Tel 01782 533016 (Uk)

Thanks in anticipation
Paul
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 29 May , 2007 9:07 am

Hi - I don't know where that manual came from :oops: - I'm sure Bradders uploaded it so I'll ask him to find it again and get some better scans of it :)
Top
paulmo101
CNC Apprentice
CNC Apprentice
Posts: 57
Joined: Thu 24 May , 2007 16:32 pm

Post by paulmo101 » Mon 04 Jun , 2007 20:52 pm

Hi Folks

Managed to get a copy from Ebay for £5.00. Its a good photocopy and everything is clear.
If anyone else is in need please let me know and I will try to obliged.

Thanks to everyone who took the time to look.

Cheers

Paul
Top
Post Reply

Return to “Denford Classifieds”