VR Milling v6.22 released 8th January 2026
Posted: Thu 08 Jan , 2026 12:23 pm
VR Milling v6.22 released 8th January 2026
Check here to download the latest version of software:
https://denfordata.com/downloads/VRMilling_V6_22.zip
// 8th January 2026
Changes made to the fourth axis when rotating the axis while the other three axes were in movement. It was tested by running for two days on repeat, rotating the billet and then running a full program. This will also improve three axes alone when they return to their home machine position at 0,0,0.
Check here to download the latest version of software:
https://denfordata.com/downloads/VRMilling_V6_22.zip
// 8th January 2026
Changes made to the fourth axis when rotating the axis while the other three axes were in movement. It was tested by running for two days on repeat, rotating the billet and then running a full program. This will also improve three axes alone when they return to their home machine position at 0,0,0.