CYCLONE U Manual

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

CYCLONE U Manual

Post by Martin » Thu 04 Jun , 2015 12:06 pm

Cyclone U Manual.
Attachments
cyclone_u_dos_manual.pdf
(2.5 MiB) Downloaded 2414 times
Top
drumsticksplinter
Posts: 33
Joined: Tue 02 Jun , 2015 20:42 pm
Hardware/Software: Denford Cyclone

Re: CYCLONE U Manual

Post by drumsticksplinter » Wed 10 Jun , 2015 21:07 pm

Many thanks for the manual!

I wonder if there is a programming manual available for the cyclone - dos software? I'm looking for information about how to "zero" the machines axes once I have reached the desired position in relation to the workpiece. I have already referenced the axes individually in the home menu.

Thanks in advance!
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: CYCLONE U Manual

Post by Martin » Thu 11 Jun , 2015 8:22 am

The operating software is the same as the Harrison TU150 E attached.
Attachments
TU150E-Harrison-CNC-Lathe.pdf
(3.21 MiB) Downloaded 649 times
Top
drumsticksplinter
Posts: 33
Joined: Tue 02 Jun , 2015 20:42 pm
Hardware/Software: Denford Cyclone

Re: CYCLONE U Manual

Post by drumsticksplinter » Fri 12 Jun , 2015 22:31 pm

Ahh great! Just what I'm looking for. Thanks! :D
Top
Post Reply

Return to “Cyclone”