Orac paramterics FHP parajust im6007 manual

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3648
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Orac paramterics FHP parajust im6007 manual

Post by Denford Admin » Thu 05 Oct , 2006 14:39 pm

Here is the Orac paramterics FHP parajust im6007 manual (23Mb Zip file)

https://www.denfordata.com/downloads/dos ... manual.zip


Kindly supplied by clarkea1 :D
Top
User avatar
Denford Admin
Site Admin
Posts: 3648
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 04 Nov , 2008 10:12 am

Have created this as a PDF file now (sorry but the page ordering is a bit jumbled)
Attachments
Orac-Parametrics-Parajust-FHP-Drive-Manual.pdf
(2.39 MiB) Downloaded 2632 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3648
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 11 Nov , 2008 12:27 pm

:fireworks: (BUMP)
Top
PDobson
Posts: 8
Joined: Sun 12 Jun , 2016 16:41 pm
Hardware/Software: ORAC CNC Lathe, with built in software.
Location: Farnham, UK

Re: Orac paramterics FHP parajust im6007 manual

Post by PDobson » Sat 06 May , 2017 15:25 pm

Hi,

I am very grateful for the FHP manual download as my ORAC speed controller just recently keeled over.

However, I am finding it quite hard to read the schematic diagrams, the resolution is just not quite there to see clearly what the connectivity is.

is there any chance that the 4 pages of schematics particularly the system diagram (page 44) and the control module (D600552) could be rescanned at a higher resolution??

Then I might be able to find out what has gone wrong with the FHP Drive.

Ta, Pete Dodson.
Top
Post Reply

Return to “Downloads”