I have a 1990 Denford cyclone ex-education machine that requires S'Ram Back up and the parameters resetting. The machine is mechanically in very good condition as it was an ex-college machine never in production I had it just for prototyping motorcycle parts but due to the time it will take to get repaired I have had to replace the machine quickly so this is now up for sale.
If you have the time to get it repaired it would make a fantastic Lathe or if your a hobbyist it could be converted to MACH3
Im looking for sensible offers for a quick sale.
It is located in my workshop in Wolverhampton and I can load it with a hoist on to a trailer or pick up.
Please call me for any further info Andy 07737472770 or email me jinks110@hotmail.co.uk for pictures
Posts: 2
Joined: Tue 14 May , 2013 8:39 am
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Site Admin
Is it a true Fanuc then ?S'Ram Back up and the parameters resetting
If so then it'd be a great machine without a retrofit to Mach.
It will have a small memory but you shouldn't need that much on a lathe anyway, especially if you get into Cycle and Macro programming. Drip feed is another option as well.
A retrofit to Mach won't be that straight forward and IMO a step backwards for the machine...it'll have AC Servos that would need replacing with stepper motors and drives.
Feel free to post a couple of photos btw
CNC Apprentice
Posts: 66
Joined: Mon 19 Apr , 2010 9:18 am
Hardware/Software: two Triacs one Orac.
Location: Ellada
CNC Apprentice
IS IT STILL AVAILABLE?
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland
I have a cyclone for sale.
Posts: 17
Joined: Mon 29 Jul , 2013 18:24 pm
Hardware/Software: Not using anything yet. Looking into getting one of the machines and start the hobby.
Hi Guru
Is your lathe still available? Could you please send me some pictures of the lathe and tell me a little more about it? Are the slides still good and what control does it have on? Please mail me on beukes1140@gmail.com?
Thanks
Johann
Is your lathe still available? Could you please send me some pictures of the lathe and tell me a little more about it? Are the slides still good and what control does it have on? Please mail me on beukes1140@gmail.com?
Thanks
Johann